|
11-
Industrial air-Drying
Alkyd Coatings:
|
These coatings are commonly
used as protective coatings in a variety of industries. There
are three kinds of alkyd paints depending on the oil content
of the resin:
-
Long-oil alkyd
resins
-
Medium-Oil alkyd resin
-
Short-Oil alkyd resin
|
 |
|
Application of each group
depends on the factors such as environmental condition, drying
time, flexibility, durability of the film, resistance against
water and chemicals, etc. Alkyd paints are used as primers (with
anticorrosive pigments such as Iron Oxide, Zinc Chromate, Zinc
Phosphate, and Red Lead) mid-coats and topcoats. They are applied
on steel structures, concrete, plaster and anywhere exposed
to moderate humidity and industrial environments. For obtaining
a better performance, applying of a compatible three-layer system
is recommended. Alkyd coatings can also be used as mid/topcoat
for epoxy primers. |
|
Code
|
Product Name
|
Product
Description
|
38100
|
Alkyd enamel
|
Saman 38100
is a high gloss finish for metals, wood, cement,
and plaster which has gloss retention, good adhesion,
durability and other properties of alkyd-based coatings.
This product is recommended for appliances and metallic
structures.
|
40420
|
Zinc phosphate alkyd primer
|
Saman
40420, an anti-corrosive primer, is formulated for protecting
metal structures. It shows good adhesion and reasonable
mechanical properties compared to similar alkyd primers, making
it suitable for applying in non-sever industrial environments.
|
40690
|
Red lead primer
|
Saman
40690 is an anti-corrosive primer used on steel and metal
structures to protect the substrate. It has the general
properties of alkyd paints and mainly used in construction
steel frame works.
|
40870
|
Zinc phosphate
Iron oxidealkyd primer
|
Saman 40870 is a durable anticorrosive primer which has
weathering resistance in humid environment. This primer
has all properties of the similar alkyd-based primers, so
it can be used as a general-purpose primer in industrial
condition.
|
42100
|
Alkyd topcoat
|
Saman
42100 is a top coat mainly used as an industrial
paint. This product has general properties of alkyd-based
coatings. It is suitable for coating machinery,
agricultural equipment, and appliances in normal
atmospheres and industrial environments. This product
should not be exposed to strong alkalines and acids.
|
46109-10
|
Fast-drying
Alkyd topcoat
|
Saman 46109-10 is a fast drying finish which has good weathering
resistance, good adhesion and high gloss retention. This
product is recommended for appliances and metallic
structures.
|
46226
|
Hammer finish
|
Saman
46226 is a decorative and protective hammer finish for metallic
substrates. Good adhesion, low dust collection, and good
mechanical properties of this product make it suitable for
coating machinery, office facilities, cabinets, and metallic
articles.
|
60000
|
Automotive gloss finish
|
Saman
60000, an automotive finish with high gloss and good adhesion,
as a maintenance or repair paint imparts good appearance and
corrosion resistance as well as durability and weathering
resistance to cars, lories, trucks, and agricultural equipment.
|
|
